Yes NavyVet those are the ones I mean. And oh okay. I am new here so I didn't know that. But thanks for letting me know. Anyways thanks for the replies guys.
And if you have any of them NavyVet and would be able to part with them then just let me know. But if not its fine. But thanks for the help none the less.
Sorry for going off topic here. But there is also another part that I need. It is the small round black knob that goes on the bass and treble sliders on a am/fm stereo radio with cassette player.
I know these radios are rare in 2000 but if anyone happens to have an old used am/fm cassette radio from a 2000 or so camaro lying around that has one of these small round black knobs.
Then please let me know and what it would cost with shipping. But if not then its okay. It isn't really needed but I prefer having all the little things like those even if there not a big issue.
But anyways just let me know when you can. Sadly I cannot take any pictures of my radio as I don't have a way of doing it. But I am hoping someone knows which radio I mean. But just let me know either way.
You may have to search a local salvage yard for the stereo knobs. Or keep an eye on eBay. Or Craigslist for someone parting out a car. I am not sure which GM vehicles got that particular stereo, but I am sure there are more models than just the f-body's. I searched Ebay yesterday but didn't see any that was for your stereo.
Edit: I just did a search on eBay for "GM cassette stereo" and got 61 items. You may do this search yourself and see which one matches yours. You may have to buy a whole new head unit to get what you need.
Posted from iPhone 5s using Camaro Zone Mobile App
Thanks for the reply. I will try and find one on eBay if I can but will to wait and see. Hopefully I wont need to buy the entire radio but will have to wait and see on that as well. Anyways thanks again for the help guys.
I have another question I want to ask. Can you tell me where to get the correct style rubber bumpers for the fuel filler door.
Reason I am asking is because they are missing on my car and I just need to know which type is correct.
I am not talking about the one big bumper on the hinge of the fuel filler door but the two other ones on the body of the car that stop the fuel filler door.
I don't know how else to explain this but I hope you get what I mean. Anyways just let me know when you can.
I have another question I want to ask. Can you tell me where to get the correct style rubber bumpers for the fuel filler door.
Reason I am asking is because they are missing on my car and I just need to know which type is correct.
I am not talking about the one big bumper on the hinge of the fuel filler door but the two other ones on the body of the car that stop the fuel filler door.
I don't know how else to explain this but I hope you get what I mean. Anyways just let me know when you can.
Okay so I finally found a picture of the type of radio I have. If anyone has this type of radio and has any of the small black bass or treble slider knobs then please let me know and what it would cost with shipping. The picture is posted below.
Wanted: 4th gen camaro door switch trim courtesy lights sockets with wiring p...
Thanks for the pic. That helps tremendously!!
I find it very odd that GM would include am/fm and just a "cassette" in 2000.
Maybe it's time to go Double DIN?
Glad it helps. And I don't use aftermarket stuff much. I prefer to keep stuff as stock as possible. I only use OEM, OER and NOS for things like this. So no thanks on that.
The only things I use that are aftermarket are mechanical and electrical stuff for the engine, transmission, rear end and suspension.
As far as cosmetics and interior items goes I don't. In other words I prefer my car to look stock but without being stock under the hood so to speak.
So as long as its like that I am happy. I hope that explains what I prefer better. Anyways thanks again guys. And if anyone has what I need then let me know.
I have another question. Does the seat tracks have the black plastic covers or not. Reason I am asking is because I keep seeing pictures of them yet my car don't got any.
Does that mean mine have been removed at some point? And if so how many are there per seat track.
Is there four pieces per seat for the front and the back bolts or is it only on the front or what?
I just need to know how many of these black plastic covers are on each seat track and if there only for the front seat track bolts or for the front and back.
I posted a picture of what I mean below. Its only one type of these covers but I hope it explains better what pieces I mean.
So please let me know on these and how many are needed per seat. If it is just two per seat for the front seat track bolts or four per seat for the front and rear seat track bolts.
Either way I just need to know is all. I also need to know what the others look like as well. And if they are the same for each seat or different for each seat.
So just let me know when you can. And I have the manual seat tracks not the power ones. I don't know if manual uses these or not but just let me know.
Thank you and Peace.
EDIT: Well I looked at my cars seat tracks and there don't seem to be any sign that they have any of these black plastic trim pieces.
There are no screw holes to attach them either on the front or the back. So I am guessing the manual seat tracks didn't come with these.
However I maybe wrong but I don't know. If anyone knows if manual seat tracks came with these pieces in 2000 then please let me know.
I have another question. Does anyone know where to get the front turn signal socket rubber o ring seal from? I have tried to find them all day in town.
But they don't have the correct flat style that the front turn signal sockets use. So if anyone knows where to get this then please let me know.
I have another question. Is it possible to put a 30 spline axle in the stock 7.5 10 bolt. Reason I am asking is because I am planning to upgrade my rear end soon with a eaton posi and 3.73 gears and need to know if I can go any bigger then the factory 28 spline.
I have read that you can only add 30 spline or bigger to the 8.5 but I just need to be sure on this. However I am hoping a 30 spline is possible with the 7.5. But if not then the 28 spline should do. Anyways just let me know.
Thanks for the replies. And yes it is because of water getting inside the lamps and burning out my bulbs. So that would be why. But if I can find the correct o-ring seal then I wont have to do this.
So if you can tell me where to get the correct flat style o-ring seal for the turn signal sockets then I hopefully wont need to drill any holes. So please let me know on this.
I doubt you can get just the rubber o-ring like you're wanting. You could try your local dealer or a website called www.gmpartsdirect.com if you want OEM stuff.
Otherwise you're probably looking at getting one from a junkyard or buying large rubber washers from a farm/tractor supply store and using them instead. Or buying a new pigtail and just taking the washer from it.
I wouldn't drill a hole that large by the way. I think you can get those signals pretty cheap on eBay.
Its okay. I can understand you mistaking it. I simply meant 1/16th of an inch. In other words small but big enough to drain water if need be. So my bad on that.
And I would rather avoid drilling a small hole but if push comes to shove I will. But hopefully I can find the correct style rubber o-ring but I will have to wait and see on this. Anyways thanks for the help so far.
Well I have decided to just go ahead and get a new turn signal socket from eBay soon. Since it is my best bet on getting the rubber o-ring seal I need.
So I no longer need to worry about finding one here. Anyways thanks again for the help so far and if I have anymore questions or need any help I will ask.
Well I have decided to just go ahead and get a new turn signal socket from eBay soon. Since it is my best bet on getting the rubber o-ring seal I need.
So I no longer need to worry about finding one here. Anyways thanks again for the help so far and if I have anymore questions or need any help I will ask.
If yours are burnt at all, you may want to use the new sockets. Just splice them onto the factory wires. They are color coded the same color as the factory wires. Pretty easy to do. I had to do this to my '01 Camaro. Both, the turn signal/DRL's were burnt, so I just replaced them. If you do this, make sure to use dielectric grease in the socket contacts. And anytime thereafter anytime you replace burnt out bulbs. This should prevent the sockets from being burnt.
Posted from iPhone 5s using Camaro Zone Mobile App
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Camaro Zone Forums
497.4K posts
17.7K members
Since 2006
A forum community dedicated to Camaro owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!