Camaro Zone Forums banner

pushrod installation help please

1K views 8 replies 5 participants last post by  xKellyxVeitx 
#1 ·
ok so i removed the pushrods today. i have them marked where each one goes where, but will it matter if they get installed upside down or will i be ok?
 
#7 ·
I never suggest this unless you have an aftermarket valvetrain.

Softer stock pushrods can save your motor if a mechanical over rev takes place.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top