Camaro Zone Forums banner

10 bolt for 95 camaro

Wanted 
1K views 8 replies 3 participants last post by  94z28 
#1 ·
Shop i called wanted 600 to rebuild mine.... I need a 10 bolt without traction control in good working order. 3.42 and 3.73 gear ratio preferred. Im located in so cal.

Sent from my LGLS740 using Camaro Zone mobile app
 
#2 ·
You can do some of the work yourself and save some money. I did my the seals and bearings in the end of the axle tubes myself and the mechanic installed my 4.10s for like $180. I bought the pinion install kit from rockauto for around $100.

Sent from my Z796C using Camaro Zone mobile app
 
  • Like
Reactions: dylanf133
#4 · (Edited)
Nice! I will talk to my dad about it and see if he can help because i cant have my car down for too long.

If you end up needing your PCM tuned for a gear change I can do it for a hell of a lot cheaper than pcmforless
Sent from my SM-G900V using Camaro Zone mobile app
Cool dude! How would that work? I send you my pcm?

Sent from my LGLS740 using Camaro Zone mobile app
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top