Heres a guide to install LED Lights in your dash. Before that is explained, we’ll take you through getting the dash off to get at the lights. We all know that at times it can be frustrating to try to figure out how to disassemble a dash. Heres a quick and easy guide for it for 1993-1996 Camaros (Firebirds should be similar, but not 100% sure).
Open the glove box and there will be 3 bolts. 9/32
Next, Lower Dash drivers side 2 bolts (9/32) and 2 Phillips screws.
After the lower dash there will be 2 more (9/32) hold the radio trim.
After all that’s removed you can start on the bezel gauge cover, there are 2 (9/32) on each and 2 on top under the dash pad.
Should look like this now
there are 4 (9/32) hold the gauges in. 2 on each side
Now for the Good part, getting the LEDs ready and inserted.
1 NEOx-R 3mm in head light switch
Gauges lights have to be modified a bit to work right
Wrap the leads around the connectors
Now install the bulbs. If they don’t light up turn them around.
7 blue WLED-x-x LED bulb 120deg
1 NEOx-R 3mm blue
For HVAC use: 74-x Wedge Base LED bulb
For Door Trim use: 74-xHP Wedge Base LED Bulb