That code tells you there is an open circuit between the controller module and the wheel sensor; has to be sensor or cable to it. These problems are usually cause by a break in the cable rather than in the sensor itself. unplug the cable where it meets the chassis. I don't remember the normal resistance but it's probably under 1000 Ohms. Just monitor it while wiggling the cable. If it's defective it will go open circuit (infinity Ohms)
The ABS relay would affect all functions.
1998 Trans Am - LS1 - 4spd Auto - strictly stock
Last edited by GaryDoug; 03-31-2017 at 11:29 PM.