Camaro Zone Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. 3rd Gen (1982-92) Camaro and Firebird Tech
    Hi guys, I'd like to replace the 305 with a 350 in my '91 Camaro with a 5 speed transmission. However, I have a couple of questions. First, where do you guys recommend buying a 350 from, considering price, performance, and reliability? And second, I have very minimal mechanical knowledge or...
  2. General Camaro & Firebird Tech
    i have been reading on the internet and found several guys taking the crank and rods out of a 327 and turning there 350 block into a 327. and they ended up with a running 327 my question is can it be done in reverse with no modifications to the block except changing the crank and rods?
  3. 3rd Gen (1982-92) Camaro and Firebird Tech
    how much hp do i need to bring my front wheels off the ground? i am curently pushing 350 and it will bark the tires in 3rd but cant raise the wheels off the ground not wanting but about an 1in off the ground
  4. 3rd Gen (1982-92) Camaro and Firebird Tech
    so bought my 3rd gen 4 weeks ago.. and the engine has run just fine until now. 350 tpi will die/stall out when at a static idle or when not in gear (t5 trans) otherwise it drives just fine. i have cleaned my MAF sensor.... and when i mess with the idle it wont hold its idle until its set all the...
  5. 3rd Gen (1982-92) Camaro and Firebird Tech
    i got a 91 camaro and it currently has a 305tbi. i want to swap it out for a 350. is it fairly simple or do i gotta change out the tranny as well? and if it is simple what else would need to be changed as well?
  6. 3rd Gen (1982-92) Camaro and Firebird Tech
    I have a 350 4Bolt main that I would like to swap my 305 out for, however I was doing research of routes for .030 over when I took the heads off sure enough they were .060 over in fact. Stumped with the build, my father needs me to clear the garage space and I could use some steer of advice and...
  7. 3rd Gen (1982-92) Camaro and Firebird Tech
    Red Dragon :icon_twisted: anyone that can has any advice is greatly appreciated. I have a 1991 Z28 5.7 Camaro. It has been sitting while i was away and now I am trying to get her running. I can get her started with starting fluid but after it burns up she quickly dies. i replaced the fuel...
  8. 3rd Gen (1982-92) Camaro and Firebird Tech
    I'm working on an 88 Trans Am Formula, originally with a 305, we're putting a 350 in and I need to know if the headers from a similar year camaro 350 will fit between the frame and block. has anyone done this swap? any information you have about tranny (auto), headers, and fitment would be helpful.
  9. 3rd Gen (1982-92) Camaro and Firebird Tech
    Ok I have an 86 Trans AM and i just put a 350 from an old Nova in it ... problem being i want to use the stock power steering pump... but im not sure what kind of bracket/spacers i'm going to need to remount this thing... it seems like everytime i bolt it up its off the belt track by just a...
  10. Introductions
    Well, I'm Courtney and I just bought a 1988 Firebird Formula 350 to restore. I love this car. It had a bad transmission so I just bought one for it, the t-tops need to be fixed because there's a leak if it rains and I had to buy a fuel pump for it. I'm looking to do a lot of mods to it. I want...
  11. 4th Gen (1993-97) Camaro and Firebird Tech
    I want to buy a v6 firebird and swap the engine with an old carburated 350. Has anyone done this before and know if it will work, im not sure if it would fit or not?
  12. 3rd Gen (1982-92) Camaro and Firebird Tech
    I currently have 1986 firebird with a 2.8L V6 with an auto trans. and I want to swap it out for a 350 V8 and a 350 turbo tranny. Is this possible without lots of mods. IE. Shifter linkages engine mounts, etc.
1-12 of 12 Results