Camaro Zone Forums banner
brake
1-5 of 5 Results
  1. V6 Camaro and Firebird Tech
    I have a 95 Camaro 3.4L. I have had the car for about three months now. Last night I was checking the vacuum lines to get the heater controls working and they were hooked up wrong. The line from the Fuel Pressure Ragulator tee'd to the MAP sensor but then went to the access port. I connected it...
  2. V6 Camaro and Firebird Tech
    I have a 2001 V6 Camaro. When I bought the car, the brake pedal would go to the floor, I thought OK, this brake fluid looks like shit! That is a problem! So, I just replaced the Master Cylinder and bled the system until that crap fluid was completely gone. Now, the pedal stops just above the...
  3. 4th Gen (1998-02) Camaro and Firebird Tech
    I have a 2000 chevy camaro and it shakes a little bit when braking. Does anybody know what the problem is? thanks in advance for any help.
  4. 4th Gen (1998-02) Camaro and Firebird Tech
    So my brake lights wont work. The bulbs still work though. The fuse is fine, and the switch is too. I checked the brake wire down the left side of the car( light green) and it was fine. They still light up for the parking lights and head lights, plus the turn signals and hazards work. :dunno: i...
  5. Appearance and Car Care
    I'm sure many of you have done this. I really like the look. Just curious as to how to go about doing this mod. I was on the Auto Zone site and saw they sell a spray can of caliper paint. I've never done any painting on a car so I want to do it right. Any help will be appreciated. Thanks.
1-5 of 5 Results
Top