Camaro Zone Forums banner

clutch

  1. 4th Gen (1993-97) Camaro and Firebird Tech
    So I just finished changing the clutch I'm my 96 Firebird Formula. Flywheel resurfaced, new brass pilot bushing, pretty much everything that numerous different forums suggested to do, I did. Everything is back together now and taken off stands in hopes of doing a test drive...So, the problem I'm...
  2. 4th Gen (1998-02) Camaro and Firebird Tech
    iv been reading on the clutch assemblies of my car and it has a recall if i take it to gm are they going to replace the part for free or what iv never delt with recalls befor car is a 99 camaro ss 6speed vert
  3. V6 Camaro and Firebird Tech
    99 Camaro Base V6. On occasion my clutch pedal sticks half way up on release (only come half way back to original position). It does not appear to effect the clutch operation. The next time I push in the clutch it clears itself. Should I be concerned? It only happens about once a month. I had...
  4. 4th Gen (1993-97) Camaro and Firebird Tech
    hi my clutch blew on my 95 trans am. it has a 5.7l v8. i dont want to put a stock oem clutch back in because i am going to be modding the car and i will be pushing over 350hp. i have read up on spec clutches and centroforce. reviews say they both are not good or they burn out quickly. if you can...
  5. V6 Camaro and Firebird Tech
    Okay, so like many v6'ers, I've got the common Rear Main Seal leak. I've been offered to have it repaired for a pretty good price. Since the tranny is going to have to be dropped, I decided to get a new clutch. Seems logical, yes? I know with the replacement of a clutch the flywheel also should...
  6. 4th Gen (1993-97) Camaro and Firebird Tech
    HEY in eager help i gotta v6 firebird 1994 and wen i am at the light and i put my car n netrual the only way i can put it in first is if i press so hard on the clutch i almost my brake my foot... please tell me the problem r problems and also my temp gage dont work
  7. General Camaro & Firebird Tech
    I recently had a new SPEC stage1 kit (clutch, pressure plate, and throwout bearing) installed in my '94 3.4. The flywheel was resurfaced at the same time. Annoyingly, things are worse now than before I took it in. I am at mile 300 of a recommended 500 mile break-in, but these problems seem to...
Top