Camaro Zone Forums banner

exhaust

  1. General Discussion
    Hello, I am kind of new to modifying cars and making them exactly what I want, so I apologize in advance for the lack of knowledge I have on different Camaro topics- I have a blue 2019 LT coupe and I want to make it louder. It doesn't have the RS package, I believe it has just the stock...
  2. V6 Camaro and Firebird Tech
    So i as far as i can tell most v6s with catbacks get a lot of rasp and sound a bit ricey. i wanted to get the american thunder catback for my 97 camaro but im worried itll do the same thing. does anyone know what catback or muffler i should get to avoid this nasty sound?
  3. V6 Camaro and Firebird Tech
    I have a 1998 V6 Camaro and want to give it a meaner sound to it. I've looked into the cat back systems and I'm thinking about getting one. I'm not sure if I want to replace it all, so my question is, could I keep all the piping/muffler I have and just put dual tips after the muffler? Or would I...
  4. V6 Camaro and Firebird Tech
    I have a 200 v6 camaro with the stock exhaust, but I want my car louder. I was wondering if I could cut the pipe before it goes to the last muffler and run a tip straight back, or just buy a new muffler (i also have a small budget) I want my car louder but I also don't want it to sound like...
  5. V6 Camaro and Firebird Tech
    I have a 1997 3.8l Camaro that is mostly stock aside from a couple bolt-ons. When ever I rev above 3,000 rpm and release the throttle, a rather high pitched, very load rattle resonates from somewhere under the body. It is strange in that it only occurs when there is no throttle and the engine is...
  6. Parts/Misc. Classifieds
    Looking for a stock z28 muffler with exhaust pipes to put on my v6 camaro becuase ive heard that the z28 exhausts are the best to put on them. If anyone have info on anyone i can get one from that be helpful. Thanks! -N
  7. V6 Camaro and Firebird Tech
    Hey all, I'm pretty new to the site but I am trying to find a exhaust that would be good for my 97 v6 camaro. I was looking at some magnaflows, flowmasters, and borla exhaust systems but wasn't really sure what to go for. I don't want to buy an exhaust that will end up taking power away from my...
  8. 4th Gen (1998-02) Camaro and Firebird Tech
    Hello Everybody, I'm looking to buy a magnaflow cat back system for my 98 T/A in the next couple weeks. There are 2 options and had a few questions about the differences in them and the price differences. The link is to the actual website. MagnaFlow Exhaust Products - For Trucks, Suv's...
  9. General Discussion
    I hope this doesn't go against any forum rules but i saw that magnaflow was doing a contest to win a free exhaust system. I figured you guys may want to get in on this so I'm putting the link on here. What are your onpinions on Magnaflow sound? link for the contest.:rock::rock::rock::rock...
  10. 4th Gen (1993-97) Camaro and Firebird Tech
    I have a 95 Camaro 3.4L. I am look at replacing my muffler. Recommendations on mufflers? What size inlet and outlet? Thanks ahead of time
  11. V6 Camaro and Firebird Tech
    I just bought my first car: a 2000 Camaro 3800 Series II v6. Not a rocket, but insurance is expensive for teenagers and I've always wanted a Camaro of my own. I fixed pretty much everything that was wrong with it, and now I am looking for modifications that I can do to it. I was thinking of...
  12. 4th Gen (1998-02) Camaro and Firebird Tech
    I bought a 3" in/outlet flowmaster super 40 series muffler for my avalanche ended up not using it, the pipe on my camaro is 2.25" if i bought pipe to make them fit how would the muffler sound on my car? its a 2000 v6 camaro :rock:
  13. General Camaro & Firebird Tech
    This morning i started up my 96 v6 firebird and i immediatly started having issues that were never apparent before. the car was idling very roughly, jerking forward. as i begin to accelerate it jerks violently, as the exhaust sounds like its skipping, kind of like how harleys sound. at idle i...
  14. General Discussion
    has anybody been able to find a nice rear bumper for exhaust notch outs or a valance that isnt like $300-$500. im not paying that for a valance but a bumper is another story. let me know if you have any good finds for rear exhaust looking better with the rear bumper not hanging down like stock...
  15. 4th Gen (1998-02) Camaro and Firebird Tech
    So im working on my full exhaust for my 1998 Camaro Z28 and i figured i would make a thread and keep you guys updated. Heres the plan in my head...hopefully it works out Long tube headers into off road y pipe and a single cutout right after into all 3" into a muffler after axle For the...
  16. 4th Gen (1998-02) Camaro and Firebird Tech
    Ok. So I have an '02 Firebird 3.8. and the guy I bought it from said it had a Cat back on it. well at the time i didnt even know what it was. but it sounds....oh so sweet. just about as good as a 6 can sound imo. but anyway this mechanic looked at it and told me it looks like its cut off too...
  17. 3rd Gen (1982-92) Camaro and Firebird Tech
    Okay so i got on the slp website to look for a laud mouth system for my 87 trans am gta but found nothing for third gen camaros or firebirds at all. has anyone put one on a third gen and if so which system did you buy and what kind of car? im sure i can modify one but i would like to know which...
  18. Parts/Misc. Classifieds
    Like the title says, looking for an SLP LM1 Catback in good condition. Everywhere I've seen online wants close to 400 bucks. Not looking to pay that much if I can help it... I've already ordered the 93-95 conversion kit, and I already have tips too. Just looking for the catback with the...
  19. 4th Gen (1998-02) Camaro and Firebird Tech
    If any of you Firebird/Trans Am owners purchase a Bassani 2.5" stainless steel true dual catback and the over-panhard-bar pipe is resting on the upper panhard bar, it is probably because you need an exhaust hangar body mount from a Camaro, because the Camaro one is different than the Firebird...
  20. 4th Gen (1993-97) Camaro and Firebird Tech
    I am looking to install a catback magnaflow system on my 3.8l v6 firebird, and I want to just buy the parts and do it myself. Im really handy with this, but beings as I am 18 and this is my first car, I dont have experience with installing an catback exhaust so I am wondering if anyone has done...
Top