Camaro Zone Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 4th Gen (1998-02) Camaro and Firebird Tech
    A buddy and I are replacing all rocker, rocker arms, and all gaskets along the way. I'm posting this thread cause, I have never done this. A list of tools/parts and some instruction videos and or some advice/tips would be much appreciated. From what I know my buddy knows what he is doing bus...
  2. 3rd Gen (1982-92) Camaro and Firebird Tech
    i have a old 69 chevy 327 with double hump heads its been sitting for 16 years and not cracked i know i have to bore the block to at least .30 because my finger nail will catch on the cylinder wall but could i get away with boring my block and just a gasket kit and slapping it down in my camaro...
  3. V6 Camaro and Firebird Tech
    Hello, Everyone...I need help. I was recently given my Aunt's 1997 Camaro (V6, T-Tops) in excellent condition (currently 128,000 miles) this past May. Around December my check engine light came on, so I took it to the local dealership and they explained there was 4 things wrong with it: 1. 02...
  4. General Camaro & Firebird Tech
    Hello, all. This is my 1st post. Haven't even detailed my profile yet. I'll try to condense this: '96 camaro rs, 3800 series, all stock. in the process of replacing a leaking lower intake manifold gasket. Already got the lower torqued down & had started to torque the upper plenum. When torquing...
  5. 4th Gen (1993-97) Camaro and Firebird Tech
    Alright so here's the current situation... About a week ago I brought my bird into my shop, jacked her up on jackstands and noticed something dripping underneath. Not much later I found it to be coolant due to the smell and obvious color. I had never seen it before nor had I had any puddles...
1-5 of 5 Results
Top