Camaro Zone Forums banner
starter
1-6 of 6 Results
  1. 3rd Gen (1982-92) Camaro and Firebird Tech
    Ok I have two camaros one has a 85 camaro 305 and the other is a 87 305 On the 85 the starter went out and I pulled the starter off the 87 to put on it and the starter wouldn't fit should they not both have the same starter
  2. 3rd Gen (1982-92) Camaro and Firebird Tech
    ok im just wondering if clearance isn't a issue on a stock engine why go with a mini high torque starter vs the stock bulky starter?
  3. V6 Camaro and Firebird Tech
    Ive been having problems with my car starting for a while. I replaced the spark plugs, spark plug wires, starter, and even the battery along with the belt. Im pretty sure its not the alternator too because i started it up, and disconected the battery while running, and it continued to run. Also...
  4. V6 Camaro and Firebird Tech
    okay i tried to take out my starter and unscrewed all the bolts n took off all electrical leads but i could not get it threw my crossover exhaust .... and my bolts are rusted on there pretty tight and i dont knw if using a torch is safe... but wen i put my old starter back on since i could not...
  5. 4th Gen (1993-97) Camaro and Firebird Tech
    Hope you guys can help, I don't wanna get into my problems, but my car is a daily driver and I really need to get it running.. It's a 94 Formula automatic. I was going to work last week, got in the car, turned the key and nothing. I have Ignition lights, The fuel pump is coming on and has good...
  6. V6 Camaro and Firebird Tech
    I have trouble starting my 94 Firebird when cold. I have to crank the engine over about 3 times and hit the gas to fire it up. Once the engine is warm it starts no problem turn key. When I first got the car the PCV air in off the intake was broken. The little rubber 90 degree boot that goes...
1-6 of 6 Results
Top