Camaro Zone Forums banner

supercharger

  1. 5th Gen (2010+) Camaro Tech
    First off I will say that I know absolutely nothing about car engines at all. With that said, I have a 2014 2SS manual 6 speed with the stock GM exhaust upgrade. That is the only thing upgraded as far as the engine goes. I believe it is 426 HP as is. I want to get it as high as I can and have...
  2. Parts/Misc. Classifieds
    i have a Vortech V1 Supercharger off of a LS2 Truck this kit has NO MOUNTS! there for it can be put on any vehicle with the proper mount! the Trim i was told when i bought it it was a S Trim i never called vortech to make sure on this the serial Number is 04192, then below it it says...
  3. Parts/Misc. Classifieds
    I have a Vortech Supercharger i purchased for my Firebird it comes with a water to air Power cooler some piping and a a stand alone Coolant system for the power cooler (with radiator), All you need is the mounts to hook it up to your engine! Came off of a LS2. Has a 2 1/2" pulley 1200 OBO. I...
  4. 4th Gen (1993-97) Camaro and Firebird Tech
    I have a 95 3.4 camaro how can i get 300hp with my v6 Thanks.
  5. Vehicle Classifieds
    it is a white 1994 camaro z28. has vortech v1 supercharger. it has a souped up lt1 motor with comp cam (mild), lunati pistons, eagle stroker crank, ported aluminum heads, comp roller rockers and springs, custom tune (rich), 42lb injectors, bov, t-rex fuel pump, pacesetter long tube headers...
  6. 4th Gen (1993-97) Camaro and Firebird Tech
    I made sure all the wires were connected and everything, then i started it up. The car ran perfectly for about 30seconds, then started to sputter a little, then just got terrible and now it wont even turn on. It will crank over and sometimes even start, but when it does it runs very very...
  7. 4th Gen (1993-97) Camaro and Firebird Tech
    i bought just the main parts of the supercharger kit, but it didnt come with any lines or fittings. what type of material should i use for the oil feed line? i looked everywhere and couldnt find a braided steel line anywhere that was long enough. could i use brass fitting from home depot and...
  8. 4th Gen (1993-97) Camaro and Firebird Tech
    hey ive got all the internals to hold up to this thing ofcourse, but ive also got stock injectors, stock fuel pump, and stock ignition. how will this affect me if i was to put on a vortech v1 supercharger kit?
  9. 3rd Gen (1982-92) Camaro and Firebird Tech
    ive got a question ive been wondering, and although i do research i really cant find much info on adding a supercharger to a TBI equipped F-body.. i would like to bolt up a centifugal Paxton pushing about 7lb. boost that a friend of mine took off his 91 Mustang, but im not quite sure how a...
Top