Camaro Zone Forums banner
21 - 21 of 21 Posts

·
Registered
Joined
·
2 Posts
Hi, I just did this mod.. I used a 3” black schedule 40 22.5 degree plumbing elbow in place of the airbox..
I cut 1” off the side that goes into the coupler on the throttle body and I cut about 5/8” at an angle off the end that goes into the air filter lid coupler.. Cleaned up the area in between the radiator and the motor..I have pictures but don’t know how to download it..
 
21 - 21 of 21 Posts
Top