Camaro Zone Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Please help. When I use a volt meter at the gas gauge sending unit, it shows 6 volts. I already bought a new sending unit and confirmed it works with a new gas gauge which works. Oddly the new gas gauge shows no voltage and when I hard wire it directly to the sending unit, the new gauge works fine by moving the float up and done.
I cut the pink wire at the gauge cluster and it shows no voltage.

My question is, are the 6 volts normal? Side note- I cut the wire before the instrument cluster connection and lost the 6 volts.

Any assistance would be greatly appreciated.

1 - 1 of 1 Posts