Camaro Zone Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Hey there,
I have an issue! I own. 96 3.8 camaro and it has a misfire on the #4 cylinder. It used to do it when it rained and when it dried up ran fine. I replaced the coil in dec. and not a single problem. I now have 3 accel coils good plugs and wires since nov and everything was fine until last night. The same coil that went before again went bad. No spark. Idk what to do
 

·
The "Senior" Member
Joined
·
18,266 Posts
Swap the coil with one of the others and see if the no spark moves with it.
If it does it's the coil, if it doesn't it's the Ignition Control Module ( ICM )
or a wiring issue.
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #3 ·
Swap the coil with one of the others and see if the no spark moves with it.
If it does it's the coil, if it doesn't it's the Ignition Control Module ( ICM )
or a wiring issue.
It was the coil! Just checked it. Idk why the same one keeps crapping out!
 
1 - 3 of 3 Posts
Top